On Mon, Nov 14, 2011 at 9:06 AM, james osburn <
[hidden email]> wrote:
> I am now succesfully building elua for the EKC-LM3S9B92 board using the lite
> tool chain from mentor graphics.
> I have been able to use TeraTerm to communicate to the instrument.
> However I have not been able to establish a TCP connection to board.
> IT seems that i have tcp build turn on in the configs header file.
> have i missed something in the build or is it that that i have tried to
> correct static ip address to
> try?
A few things:
Are you attempting to ping the board or log into the shell over TCP?
The shell can only be set to either UART or TCP/IP.
This particular port has DHCP off by default and it picks this IP:
192.168.100.90
netmask: 255.255.255.0
Gateway: 192.168.100.20
DNS: 192.168.100.20
You might want to check out this in the docs to adjust the default
configuration in platform_conf.h:
http://www.eluaproject.net/doc/v0.8/en_arch_tcpip.htmlYou can change the IP or switch to DHCP and probably look for the
"elua" host on your network.
For console configuration check out this page:
http://www.eluaproject.net/doc/v0.8/en_arch_con_term.htmlNote that there are some conditionals in platform_conf.h for
particular targets that get set automatically, but the 6965 will
certainly do the shell over tcp/ip, do dhcp, etc..
> James
>
> _______________________________________________
> eLua-dev mailing list
>
[hidden email]
>
https://lists.berlios.de/mailman/listinfo/elua-dev>
>
_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
Locked
