Hi Bill,
> By default the serial console on the CDC port of the stm32fdiscovery
> board, what steps are needed to move to one of the other serial ports?
> I have changed sercon in stm32f4discovery.lua to uart = 1 and
> commented out the cdc buf size to start.
The (brand new) stm32f4-nucleo config moved the console to UART2 with
the config below. Note that it changes both components.sercon and adds
config.stm32f4_uart_pins.
Cheers,
Mark
-- STM32F4-NUCLEO build configuration
return {
cpu = 'stm32f401re',
components = {
sercon = { uart = "1", speed = 115200 },
romfs = true,
cdc = false,
advanced_shell = true,
term = { lines = 25, cols = 80 },
linenoise = { shell_lines = 10, lua_lines = 50 },
stm32f4_enc = true,
rpc = { uart = "0", speed = 115200 },
adc = { buf_size = 2 },
xmodem = true,
cints = true,
luaints = true
},
config = {
egc = { mode = "alloc" },
vtmr = { num = 4, freq = 10 },
ram = { internal_rams = 1 },
clocks = { external = 8000000, cpu = 84000000 },
stm32f4_uart_pins = { con_rx_port = 0, con_rx_pin = 3, con_tx_port
= 0, con_tx_pin = 2 } },
modules = {
generic = { 'all', "-i2c", "-net" },
platform = 'all',
},
}
_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
Locked
