Mizar32 - problem with board ethernet / rtc

[Marcus Vinicius Costa]

Hi all,

Has anyone worked with the Mizar32's Ethernet board?

I have a strange problem when I plug  the ethernet card on the mainboard of Mizar32.
Everything works perfectly, but when I plug the ethernet board stop all, I can not access nothing and eLua shell not respond too, and just removing the ethernet card and everything returns to normal.

I have done to measure the power of the board and is normal, no apparent short circuit ...

Does anyone know what be happening?

Best
Marcus Vinicius

_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev

[Martin Guy]

On 13 June 2012 23:18, Marcus Vinicius Costa <[hidden email]> wrote:
> Has anyone worked with the Mizar32's Ethernet board?
>
> I have a strange problem when I plug  the ethernet card on the mainboard of
> Mizar32.
> Everything works perfectly, but when I plug the ethernet board stop all, I
> can not access nothing and eLua shell not respond too, and just removing the
> ethernet card and everything returns to normal.

hi!
  The problem is that the firmware blocks trying to acquire the PHY ID
of the ethernet cable.
The solution is to connect it to a hub or something similar.  Even if
there isn't DHCP, it should come up anyway and poll for DHCP

Let me know if this solves your problem & thanks for trying Mizar32

    M
_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev

[Marcus Vinicius Costa]

Hi Martin,

Thanks for help, your solution solved the problem and the board works perfectly now...
The ethernet module in mizar32 works better than LM3S8962, my last board, its perfect.

Thanks again

Marcus

2012/6/14 Martin Guy <[hidden email]>

On 13 June 2012 23:18, Marcus Vinicius Costa <[hidden email]> wrote:
> Has anyone worked with the Mizar32's Ethernet board?
>
> I have a strange problem when I plug  the ethernet card on the mainboard of
> Mizar32.
> Everything works perfectly, but when I plug the ethernet board stop all, I
> can not access nothing and eLua shell not respond too, and just removing the
> ethernet card and everything returns to normal.

hi!
 The problem is that the firmware blocks trying to acquire the PHY ID
of the ethernet cable.
The solution is to connect it to a hub or something similar.  Even if
there isn't DHCP, it should come up anyway and poll for DHCP

Let me know if this solves your problem & thanks for trying Mizar32

   M
_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev

_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev